USD
  • USD
  • EUR
  • GBP

FREE SHIPPING in UK for orders over £75!

Altera Cyclone IV FPGA Learning Board EP4CE6E22C8N and USB Blaster Programmer

Weight:

Collections: All products, Surgical Medical Equipment

Product type: Business & Industrial:Electrical & Test Equipment:Electronic Components:Semiconductors & Actives:Int

Vendor: Generic

Availability:

$144.95



Altera Cyclone IV FPGA Learning Board EP4CE6E22C8N and USB Blaster Programmer

The easyFPGA-Cyclone-IV development board provides a complete hardware environment for designers to accelerate their time to market.The kit delivers a stable platform to develop and test designs targeted to the low-cost and low-power Altera Cyclone IV FPGA. The installed Cyclone IV device offers a prototyping environment to effectively demonstrate the enhanced benefits of low-cost Altera FPGA solutions. Reference designs are included with the kit to exercise standard peripherals on the evaluation board for a quick start to device familiarization.


Feature:
  • FPGA : Altera Cyclone IV FPGA EP4CE6E22C8N
  • JTAG Port : On-board JTAG Port for programming
  • SDRAM :One 64Mbit Single Data Rate Synchronous Dynamic RAM memory chip
  • Flash:32Mbit NOR Flash memory ,Support Byte (8-bits)/Word (16-bits) mode
  • Series Flash: EPCS4 4Mbit
  • PS2 Port :Provides the PS2 port for Mouse and Keyboard
  • Pushbutton switches :
  • User Keys
  • Normally high; generates one active-low pulse when the switch is pressed
  • Infrared Receiver :Communicate with a Remoter for wireless control
  • General User Interfaces :
  • User LEDs (Active low)
  • 4 digit 7-segment displays (Active high)
  • Active Type Buzzer
  • System Clock inputs :48MHz oscillator
  • VGA output :
  • Uses a 8-bit resistor-network DAC under RGB565 Mode
  • With 15-pin high-density D-sub connector
  • AD Circuit and SMA input :
  • Use an AD chip
  • Use a SMA port for AD signal input
  • Voltage Regulator Circuit :Provides 1.2V,2.5V and 3.3V for system power supply
  • Jumper:Selection for External or on-board AD signal source.
  • On-board USB to TTL/RS232 Module :
  • Use PL2303 for USB-TTL/RS232 Converting (Without DB-9 serial connector)
  • 26-PIN Expansion Headers :
  • Altera Cyclone IV I/O pins, as well as 3 power and ground lines, are brought out to the 26-pin expansion connectors

Altera FPGA CPLD USB Blaster programmer:
  • Fully compatible with original Altera USB-Blaster.
  • Supported target voltage : 2.0V-5.5V
  • Support all ALTERA deveice.
  • CPLD:MAX 3000A、MAX 7000A、MAX 7000B、MAX 7000S、MAX 9000、MAX 9000A and MAX II.
  • FPGA:Stratix、Stratix II、Stratix GX、Cyclone、Cyclone II、Cyclone III、ACEX 1K、APEX II、APEX 20K、APEX 20KE、APEX 20KC、FLEX 10K、FLEX 10KE、FLEX 10KA、FLEX 6000、FLEX 8000、EPCS1、EPCS4、EPCS16、EPCS64EPC1、EPC4、EPC8、EPC16
  • Support:JTAG, AS, PS Mode.
  • Support NiosII embeded core based debug,;
  • Supports Quartus II SignalTap® II Logic Analyzer (for logic analysis)
  • High performance, 6 times faster than ByteBlasterII !!
  • USB interface with status and Power LED.
Package Included:
1 x FPGA EP4CE6E22C8N board
1 x USB Blaster Programmer with Cable
1 x Remote controller
1 x USB Cable
1 x CD (Sch, example code, IC datasheet)
 

IMPORTANT NOTE: Payments received after 4:30 p.m. PST Monday - Friday will be shipped the following business day. Payments received on Weekends and Holidays will be processed and shipped on the following business day.

REGION SHIPPING RATE SHIPPING METHOD
U.S. - Lower 48 States
Via China Post EUB/EMS/DHL
China Post/EMS/DHL
UK/Australia
Via China Post EUB Service. In the Shipping and payment tab above, select country and enter your postal code in the shipping calculator to obtain shipping rate. Deutsche Post /China Post/EMS/DHL
All other Int'l Via China Post. In the Shipping and payment tab above, select your country in the shipping calculator to obtain shipping rate. Deutsche Post/China Post/EMS/DHL


  • PayPal payments can only be shipped to an address you specified at the time of check out.

  • International Buyers: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. In some instances, please expect delays due to customs.

    If you need assistance processing your payment, please contact us through eBay message (Ask a question) during normal business hours of Monday-Friday 9am-6pm and one of our representatives will assist you.

Step 1: Contact us through eBay message (Ask a question), so we can issue an RMA #.
Step 2: Please let us know how we can assist you (Return or Exchange):

Return Shipping
  • Buyer is responsible for return shipping cost.
Exchange
  • Exchange your purchase for up to 30 days from date of purchase, must be in brand new, resalable condition. (No restocking fee)
Return
  • All returns will be subject to 15% restocking fee.
  • Return your purchase for up to 30 days from date of purchase for a refund, including original shipping cost minus 15% restocking fee. Must be in brand new, resalable condition.
  • Item will be inspected within 3 business days, refund will be given using the same service buyer used to pay.
  • Items that have been installed, used or altered are non-returnable.
Item arrives damaged
  • If an item arrives damaged, please contact us through eBay message (Ask a question) for immediate assistance.
    ***Please note that installation and other incidental fees are buyer's responsibility.***

If you are not satisfied with your order, please contact us through eBay message (Ask a question) during normal business hours of Monday-Friday 9am-6pm and one of our representatives will assist you.



Powered by SoldEazy


On Mar-18-17 at 04:51:10 PDT, seller added the following information:

__dc_tracker


inkFrog Analytics